
Industry solutions
Automobile & Engineering
Connected water solutions for large roofs, utilities, washing and process requirements.
The operating challenge
Automobile and engineering sites combine large catchments with variable process, washing and utility demands that require reliable treatment and disciplined monitoring.
What matters at this type of site
Vehicle washing, machining, surface preparation, cooling, canteens and domestic use can create different water-quality and quantity requirements across one campus. Large paved areas also make runoff, oil control and first-flush planning important.
SWR maps the water circuits, identifies opportunities for non-potable reuse, and designs a connected scope for rainwater harvesting, filtration, RO, wastewater treatment, recharge and flow monitoring without treating every stream as the same.
Where SWR can help
- Large-roof and paved-catchment assessment
- Industrial filtration, RO and process-water planning
- Washing and utility-water reuse where suitable
- Recharge, CGWA compliance and flow monitoring
A practical programme
Connect the right systems to the way your site actually operates.
- 01Large-roof and paved-catchment assessment
- 02Industrial filtration, RO and process-water planning
- 03Washing and utility-water reuse where suitable
- 04Recharge, CGWA compliance and flow monitoring
- 05Phased implementation for operating plants
What the programme can support
Lower tanker and borewell pressure
Better control of water use and runoff
Frequently asked
Questions from project teams.
Can rainwater be used in automobile or engineering facilities?+
After suitable first-flush treatment and quality checks, harvested rainwater may support approved non-potable uses such as utilities, washing or recharge.
Why separate water streams on an engineering campus?+
Separating relatively clean runoff, domestic sewage and process or washing streams helps select the right treatment and avoid unnecessary operating cost.
Does SWR help with monitoring?+
Yes. The scope can include flow meters, water audits, reporting routines and groundwater monitoring where the site requires them.
Start with your site
